|
|
|
|
|
|
|
| |
 |
|
 |
|
1.
Peterson, Edward L "Modal
Exacition : Good Data not Bad
Data" Proceedings,
IMAC XI,Orland
Florida, February 1993
2. McConnell, Kenneth G and Paulo
S Varoto "Force
Transducer Bending Moment Sensitivity
Can Affect the Measured Frequency
Response Functions"
Proceedings, IMAC
XI, Orlando Florida, February
1993
3. Patrick, GB
"Practicalities of Acquiring
Valid Data During Modal Tests"
Proceedings, IMAC
III, Orland Florida,845-849, 1985
4. Ramsey, K "Effective
Measurements for Structural Dynamics
testing:Part II"Sound
& Vibration,April
1976
5. Richardson, M H "Measurement
& Analysis of the Dynamics
of Mechnical Structures"H-P
Report
6.Olsen, N L
"Using & Understanding
Electrodynamic Shaker in Modal
Application"Proceedings,
IMAC IV Los Angeles California,
1160-1167, 1986
7. Peterson, Edward L
"Modal Excitation:A Comparison
of Three Different Methods"Proceeding.
IMAC VI, Orlando Florida, 1988
8. Sloane, E and B McKeever "Modal
Survey Techniques and Theory"SAE
Paper
No. 751067,
1975
9. Stahle, C V "Modal
Test Methods & Applications"
Journal of Environmental Sciences,
Jan-Feb 1978
10. Brown, D L, G D Carbon, and
K Pamsey "Survey
of Excitation Techniques Applicable
to the Testing of Automotive Structures"
SAE Paper No. 770029, 1977 |
| |
|
11. Stroud, R C "Excitation,Measurement
& Analysis Methods for Modal
Testing"
Sound & Vibration, August
1987
12. Peterson, Edward L W M Rusen,
and T A Mouch
"Modal Excitation:Force
Drop-off at Resonances"Proceedings,IMAC
VIII, Orland Florida 1990
13. Mirimand, N, J F Billaud,
F Leleux, and J P Krenevez "Identification
of Structural
Modal Parameters
by Dynamic Tests at a Single Point"
Shock & Vibration
Bulletin 46,Prt 5,197-212,1976
14. Allemang, R J and D L Brown
"Multiple-Input Experimental
Modal Analysis_A
Survey"Int'l
Journal Analytical & Experimental
Modal Analysis, Volume 1,
No. 1, 37-44, 1986
15. Allemang, R J R W Rost, and
D L Brown "Multiple-input
Estimation of Frequency
Response Functions:Excitation
Considerations" ASME
Paper No. 83-DET-73, 1983
16. Voorthees, C R and G A Clark
"Comparison
of Sine & Random Test Results
from a
Statellite Modal
Test" Proceeding,
IMAC III, Orland Florida, 814-823,
1985
17. Hunt, D L "A
Comparison of Methods for Aircraft
Ground Vibration
Testing" Proceedings,IMAC
III,Orlando Florida, 131-137,
1985
18. Peterson, Edward L and A L
Klosterman
"Obtaining Good Results from
an
Experimental Modal
Survey" Society Environmental
Engineering Symposium,
London England, 1977
19. Peterson, Edward L and W M
Rusen "Factors
to Consider When Selecting a
Modal Excitation
Energy Source" IMAC
VII, Las Vegas Nevada, 1989
20. Carbon, G D, D L Brown, and
R J Allemang "Application
of Dual Input Excitation
Techniques to the
Modal Testing of Commercial Aircraft"
Proceeding, IMAC I,
559-565, 1982 |
| |
|
21. Hunt, D L, B Wendler, and
S Soule "Comparison
of Multiple Input Random &
Sine Excitation Methods
for Aerospace Structures"
Proceeding, IMAC IV,
Los Angeles California,563-571,1986
22. Van der Auweraer, H,P Vanherck,
P sas and R Snoeys "Experimental
Modal
Analysis with Stepped
Sine Excitation" Proceedings,
IMAC IV, Los Angeles
Califonia, 572-580, 1986
23. Chu, F H, C Voorhees, W W
Metzger, R Wilding "Spacecraft
Modal Testing Using
Systematic Multi-Shakers
Sine-Dwell Testing Techniques"
Shock & Vibration
Bulletin 51, Part 2, 41-58,May
1981
24. Vold, H and T Rocklin
"The Numerical Implementation
of a Multi-Input Modal
Estimation Algorithim
for Mini-Computers"
Proceedings,IMAC I,Orlando Fllrida,
542-548,1982
25. Brickey, C E "Multiple
Sine Excitation Approach to Ground
Vibration
Testing" Proceedings,IMAC
I, Orland Florida, 82-87,1982
26. Crowley, J, R Russell &
Edward L Peterson "Multiple-Input
Method Speeds
Spaces Shuttle Testing"
Sound & Vibartion, June 1983
27. Musson, B G and J R Stevens
"Comparison of Modal Test
Results from
Non-Contacting and
Conventional Response Measurements"
Proceedings,
IMAC IV, Los Angeles Calif,
1487-1493, 1986
28. Tomlinson, G R "Detection,
Identification & Quantification
of Non-Linearity in
Modal Analysis_A
Review" Proceedings,
IMAC IV, Los Angeles Californa,
837-843, 1986
29. Chen, Jay-Chung and Ben K
Wada "On
Sine Dwell or Broadband Methods
for
Modal Testing",
Jet Propulsion Laboratory, Applied
Technologies Section,
California Inst. of Technology,
Pasadena Calif.,
30. Mitchell, L D and K B Elliott
"A
Method for Designing Stingers
for Use in Mobility
Testing",
Proceedings IMAC II, Vol.II, pp.872-876,Orlando
Florida,February 1984 |
| |
|
31. Hunt, D L, H Vold, E L Peterson,
R Williams "Optimal
Selection of Excitation
Methods for Enhanced
Modal Testing" 25th
Structures, Structural Dynamics
& Materials Conference,
May 1984.
32. McConnell,Kenneth G., and
Paulo S Varoto "A
Model for Force Transducer
Bending Moment Sensitivity
and Response during Calibration",
Proceedings IMAC
XI,pp.364-368,February
1993.
33. Foss,Gary C. "Free-Free
Modal Testing without Suspension
Modes",
Proceedings IMAC XIV,pp.437-441,
February 1996.
34. Hunt, david L., and Ralph
D. Brillhart "Lessons
Learned from Modal Testing of
Aerospace Structures",
Journal of the IES,pp.49-56.Jan/Feb
1993 |
| |
|
| |
 |
|
1.Kavarana,
Redliers, "Squeak
and Rattle - State of the Art
and Beyond". SAE Paper
99NV273, Noise & Vibration
Conf Proceedings, 1999.
2. Schmeider, Peterson, "Developing
Robust Vibartion Excitation and
Control Methods
for Evaluating Rattle
Noise in Automotive Components".
SAE Paper 99NV143, Noise
& Vibartion Conf.
Proceedings, 1999
3. Feng, Hobelsberger,
"Detection and Scaling of
Squeak & Rattle Sounds".
SAE
Paper 1999-01-1722, Noise
& Vibartion Conf., 1999
4. Liu, Devilbiss,Freeman, "Experimental
and Theoretical Analysis of Seat
Belt
Retractor Assembly
Rattle Noise Abatement".
SAE paper 1999-01-1723, Noise
&
Vibartion Conf. 1999
5. Tsou, Chang, "Rattle
Noise Measurement of a Plate-Beam
System". SAE Paper
No. 1999-01-1724, Noise
& Vibartion Conf 1999
6. Malinow, Perkins, "Seat
Belt Retractor Rattle:Understanding
Root Sources and
Testing Methods".
SAE Paper No 1999-01-1729, Noise
& Vibration Conf., 1999.
7. Soine, Evensen, Vankarsen "A
Tool for Benchmarking and Assessing
Designs for
Squeak and Rattle
Performance". SAE
Paper No. 1999-01-1730, Noise
& Vibration
Conf., 1999.
8. Juneja, Rediers, Kavarana,
Kimball, "Squeak
Studies on Material Friction Pairs".
SAE Paper 99NV272, Noise
& Vibration Conf.,Proceedings,
1999.
9. Byrd, Peterson, "A
Comparison of Different Squeak
& Rattle Test Methods for
Large Modules and
Subsystems". SAE Paper
SAE 0693, SAE Conf. Proceedings,
1999.
10. Eiss, Lee, Trapp, "Frictional
Behavior of Automotive Interior
Polymeric Material
Pairs".
SAE Paper 972056, Noise &
Vibration Conf. Proceedings, pp
1479-1496, 1997. |
| |
|
11. Rusen, Peterson, McCormick,
Byrd, "Next
Generation, Means for Detecting
Squeaks and Rattles
in Instrument Panels".
SAE Paper 972061, Noise &
Vibration
Conf. Proceedings, pp.
1527-1532, 1997.
12. Nolan, Sammut, "Automotive
Squeak and Rattle Prevention".
SAE Paper 921065,
Noise & Vibration
Conf. Proceedings, pp 355-363,
1992
13. Nolan, Rediers, Loftus, Leist,
"Vechicle
Squeak and Rattle Benchmarking".
IMAC-XIV, SEM, pp.483-489,
1996.
14. Frusti, Fletcher, Grinn, Gu,
"Vechicle Seat Subsystem
Squeak and Rattle Testing
and Requirements".
IMAC-XIV, SEM, pp.497-501, 1996. |
|
|
 |
|
| |
| |
|
| |
|
|
|
|
|
|
